The EE210 is the ideal transmitter for high accuracy measurement of relative humidity and temperature in demanding climate control applications.

The EE150 humidity and temperature transmitter has been optimised specifically for use in the HVAC and building automation and impresses with an outstanding price/performance ratio.

EE441 strap-on sensors are used for temperature measurement on round ducts and pipes.

Applications:

The EE820 is designed for use in harsh, demanding applications. A multipoint CO2 and temperature factory adjustment procedure leads to an excellent CO2 measurement accuracy over the entire temperature working range.

The EE771 is a thermal mass flow meter for compressed air and gases. Irrespective of pressure and temperature, the EE771 flow meter registers mass flow, volumetric flow or standard flow.

The EE772 is a thermal mass flow meter for compressed air and gases. Irrespective of pressure and temperature, the EE772 flow meter registers mass flow, volumetric flow or standard flow.

EE10 is a high accuracy, long term stable humidity and temperature room transmitter designed for HVAC applications in residential and commercial buildings.

E+E sensors EE451 are used for temperature measurement in heating, ventilation and air conditioning systems enabling weather-dependent temperature regulation.

The EE211 is dedicated for accurate and long term stable measurement under continuous high humidity (>85 % RH) and condensing conditions in demanding climate control.

The EE850 incorporates the E+E dual wavelength NDIR CO2 sensor, which compensates for ageing effects, is highly insensitive to pollution and offers outstanding long term stability.

The EE210 is the ideal transmitter for high accuracy measurement of relative humidity and temperature in demanding climate control applications.

Cable sensors for temperature measurement are used in heating, ventilation and air conditioning systems as well as for process control.

The EE220 humidity and temperature transmitter with pluggable, interchangeable probes is optimized for clean room, food and pharmaceutical industry.

Applications:

The EE776 is a thermal mass flow meter dedicated for monitoring compressed air, nitrogen, CO2 or other non-corrosive and non-flammable gases. It can be employed in pipes from DN50 to DN700 (2" to 28") and at up to 16 bar (232 psi)

The modular E+E CO2 transmitter EE870 is designed for easy integration into OEM equipment for demanding applications.

The EE23 is a cost optimised transmitter for industrial and high-end HVAC applications up to 120°C (248°F). Relative humidity and temperature are accurately measured and dew/frost point temperature precisely calculated.

EE471 sensors are used for temperature measurement in applications where a separate housing with remote probe is required for installation.

Applications:

EE871 operates on the dual wavelength NDIR principle, which compensates for ageing effects, is highly insensitive to pollution and stands for outstanding long-term stability even in demanding environment.

The EE75 air velocity transmitters are optimized for high accuracy up to 40 m/s (8000 ft/min) over the temperature range -40...120 °C (-40...248 °F).

EE210 Outdoor is optimized for outdoor and meteorological applications. In addition to precise measurement of relative humidity and temperature, the transmitter calculates additional parameters such as dew point, frost point

EE10 room temperature transmitters are the ideal solution for indoor applications such as HVAC in residential and official buildings.

EE893 and EE892 operate on the dual wavelength NDIR principle, which stands for outstanding long term stability even in demanding environment.

Applications:

The Air flow sensor EE650 is dedicated for accurate and reliable measurement in building automation and ventilation applications.

EE33 is optimized for reliable RH&T measurement with temporary condensation, permanent high humidity or chemical exposure. Condensation on the monolithic RH sensor & the filter cap is prevented by controlled heating of the sensor

The EE211 is dedicated for accurate and long term stable measurement under continuous high humidity (>85 % RH) and condensing conditions in demanding climate control.

The EE220 humidity and temperature transmitter with pluggable, interchangeable probes is optimized for clean room, food and pharmaceutical industry.

EE33-M is optimized for reliable humidity and temperature measurement in high-end meteorology applications.

EE660 air velocity transmitters operate on the hot film anemometer principle and are designed for the precise measurement of very low air velocity. It is optimised for laminar flow monitoring and for clean room applications.

The EE02 highly accurate thermo-hygrometer is battery oerated and can be used as table top or wall mount device.

The EE03 is an accurate humidity and temperature digital sensor with serial two-wire interface and a simple E2 protocol.

EE300Ex temperature transmitter is dedicated for measurement in explosion hazard areas. It complies with the classifications for Europe (ATEX), Int. (IECEx) and USA/Canada (FM), and can be employed in gas and dust explosion hazard

EE671 is a compact air velocity probe for HVAC applications. The built-in flow sensing element VTQ combines the advantages of state-of-the-art E+E thin-film manufacturing and of the newest transfer molding technology.

The EE300Ex RH&T transmitter is for measurement in explosion hazard areas. It complies with the classifications for Europe (ATEX), Int. (IECEx) and US (FM) and can be employed in gas and dust explosion hazard areas to Zone 0/20.

Reliable dew point monitoring is essential for minimizing ownership costs of compressed air supply with refrigeration dryers. It allows for condition based planning of the service intervals and for avoiding breakdowns.

Applications:

EE04 compact humidity and temperature probe is optimised for OEM applications. It offers high accuracy and long term stability at an outstanding price / performance ratio.

The EE576 is a compact air velocity transmitter designed for measurement of lowest velocity.

The EE08 is optimized for accurate humidity and temperature measurement over a wide working range.

The compact EE355 dew point transmitter with a measuring range down to -60 °C (-76 °F)Td and outstanding price/performance ratio is dedicated for applications in compressed air systems, plastic dryers & industrial drying processes

The EE060 and EE061 are compact humidity and temperature probes with excellent price/performance ratio, optimized for OEM applications.

The dew point transmitter EE371 with a measuring range -60...60 °C (-76...140 °F) Td is optimized for low dew point measurement in compressed air systems, dryers for plastic and other industrial processes.

The EE071 accurately measures relative humidity and temperature and calculates physical quantitites such as dew point temperature, mixing ratio and absolute humidity.

The HUMOR 20 RH calibrator is a high-end portable reference device traceable to international standards. The HUMOR 20 generates RH in the range 10-95% RH and can accommodate probes of diameter 8-25.5 mm as well as data loggers.